 |
 | Chemic ALS - Via S.Francesco d'Assisi, 200 - 70018 Rutigliano (BA) - Italy - tel. (+39)080.476.10.66 - fax (+39)080.476.11.26 - info@labcatalogo.it - www.labcatalogo.it |
Main -> Safety, cleaning, hygiene -> Cleaning aids, equipment -> Ultrasonic cleaning |
SONOREX SUPER Ultrasonic Cleaning Compact Units, BANDELIN |
SONOREX SUPER Ultrasonic Cleaning Compact Units
CE marking. For aqueous cleaning fluids. Drip proof stainless steel housing. Timer 1-15 min and ∞. 35 kHz, Stainless steel tank. RK 1028 CH and RK 1050 CH oscillation tanks, made of welded V4A stainless steel. From RK 102 H above with drain ball valve. 30 – 80°C heating on H models. Fixed 65°C heating on RK 31 H.
SONOREX DIGITAL 10 P Ultrasonic Cleaning Compact Units
CE marking. The only ultrasonic cleaners with a 10 program memory. Digital power, time and temperature selection. Exact setting of all parameters, reliably reproducible results for all laboratory tasks. DEGAS button for quick degasifying . Power control range 10 – 100%, power stabilization. Digital thermometer, bath temperature display accuracy ±1.5°C. Heating can be set up to +20 to 80°C. Digital timer 1 – 99 min and ∞, remaining time display. Drain ball valve, except DK 102 P.
6 SONOREX DIGITEC digital ultrasonic Cleaning Compact Units
- With CE mark
- 4-step operation as "plug and clean"
- "H" units with heater for 20 to 80°C, controlled by thermostat, with LED for temperature and heating phase
- Warning LED for overheating
- Time setting 1 – 30 min or continuous operation
- Degas - freely selectable sound pulse - with LED
- Stainless steel housing, spray-water proof, IP 33 protection
- SweepTec for continuous sound field oscillation
- RC version with infrared interface
Top performance: To improve the effect, the ultrasound is modulated. Depending on the unit, HF performance is then increased by 4-fold or 8-fold, when used together with SweepTec. Accessories as for RK units.
SONOREX DIGITEC DT...-RC Units with Infrared Interface
| Type | Bath dimensions L × W × D mm | Bath vol. l | Ultrasonic max. output W | HF output Weff | Order No. | |
(7) | DT 102 H-RC | 240×140×100 | 3.0 | 480 | 120 | 10 07 33071 | |
| DT 255 H-RC | 300×150×150 | 5.5 | 640 | 160 | 10 07 33081 | |
| DT 510 H-RC | 300×240×150 | 9.7 | 640 | 160 | 10 07 33091 | |
| DT 514 BH-RC | 325×300×200 | 18.7 | 860 | 215 | 10 07 33095 | |
Accessories for Digitec DT...-RC Units
| Article | Order No. | |
| WINSONIC® DT remote control | 10 07 33090 | |
| consisting of: software and infrared adapter IR 1 | |
Accessories suitable for DT 102 H-RC, DT 255 H-RC, DT 510 H-RC und DT 514 BH-RC
SONOREX accessories for ultrasonic cleaners
Vessels or items to be cleaned may not be placed on he bottom of the tank! Stainless steel baskets - required accessories - for suspension in the tank. Stainless steel equipment holder, model GH 1 for 1 liter glass columns, other equipment holders bottom with mesh size 12,5 × 12,5 mm except GH 1. DE perforated stainless steel cover for holding insert containers (glass, plastic stainless steel). ES insert strips, hold 4 containers, SH 28 C strainer holder for 5 test sieves. SH 7 = test sieve holder. Sieve inserts fit insert containers.
Stainless steel baskets
| Type | fits | Order No. | |
| K 08 | RK 31/H, DT 31/H | 96 07 31116 | |
| K 1C | RK 52/H | 96 07 33024 | |
(8) | K 3C | RK 100/102 H, DT, 100 H, DK 102 P | 96 07 33025 | |
| K 3CL | RK 103 H/ DT 103 H | 96 07 33026 | |
| K 6 | RK 106/ DT 106 | 96 07 31103 | |
| K 6L | RK 156/ DT 156 | 96 07 31104 | |
| K 6BL | RK 156 BH/DK 156 BP/ DT | 96 07 31113 | |
| K 7 | RK 170 H | 96 07 31121 | |
| K 18S | RK 158 S | 96 07 31118 | |
| K 5C | RK 255 H/DK 255 BP DT 255/H | 96 07 33027 | |
(11) | K 10 | RK 510/ H, DT 510/ H | 96 07 31105 | |
| K 10B | RK 512, DK 512 P, DT | 96 07 31106 | |
| K 13 | RK 513 | 96 07 31120 | |
| K 14 | RK 514/H, DT | 96 07 31107 | |
| K 14B | RK 514 BH, DK 514 BP, DT | 96 07 31108 | |
| SH 28C | RK 1028 C | 96 07 31307 | |
| K 28 | RK 1028/H, DK 1028 P, DT | 96 07 31109 | |
| K 28C | RK 1028 CH/C, DT ... | 96 07 31110 | |
| K 40 | RK 1040 | 96 07 31119 | |
| K 50 | RK 1050, DT | 96 07 31111 | |
| K 50C | RK 1050 CH, DT | 96 07 31112 | |
Equipment holder
| Type | fits | Order No. | |
(12) | GH 1 | RK 52/H, RK 100/102 H, RK 103 H, 100 H, DK 102 P, DT 102 H | 96 07 32009 | |
| SH 7 | RK 106, DT 106 | 96 07 32000 | |
(13) | GH 10 | RK 510/H, DT 510 H | 96 07 32001 | |
| GH 10B | RK 512/H, DK 512 P, DT 512 H | 96 07 32002 | |
| GH 14B | RK 514 BH, DK 514 BP, DT 514 BH | 96 07 32004 | |
| GH 28 | RK 1028 H, DK 1028 P | 96 07 32005 | |
| GH 28 C | RK 1028 CH/C | 96 07 32010 | |
| GH 50C | RK 1050 CH, DT 1050 CH | 96 07 32008 | |
Stainless steel cover
| Type | fits | Order No. | |
| D 08 | RK 31/H, DT 31/H | 96 07 35016 | |
| D 52 | RK 52/H, DT 52/H | 96 07 33002 | |
(10) | D 100 | RK 100/102 H, RK 103 H, 100 H, DK 102 P, DT 100/H, DT 102 H, DT 103 H | 96 07 33003 | |
| D 6 | RK 106, DT 106 | 96 07 35005 | |
| D 156 | RK 156/BH, DK 156 BP, DT | 96 07 33004 | |
| D 170 | RK 170 H | 96 07 33006 | |
| D 158 | RK 158 S | 96 07 33005 | |
| D 255 | RK 255/H, DK 255P, DT 255/H | 96 07 33007 | |
| D 510 | RK 510/H, RK 512 H, DK 512P, DT 510/H, DT 512/H | 96 07 33008 | |
| D 513 | RK 513 | 96 07 33009 | |
| D 514 | RK 514/H/BH, DK 514 BP, DT 514/H | 96 07 33010 | |
| D 1028 | RK 1028/H/ DK 1028 P, DT | 96 07 33011 | |
| D 1028C | RK 1028 CH, DT ... | 96 07 33012 | |
| D 40 | RK 1040 | 96 07 35020 | |
| D 1050 C | RK 1050/CH, DT... | 96 07 33013 | |
Perforated stainless steel cover
| Type | fits | Order No. | |
| DE 8 | RK 31/H, DT 31/H | 96 07 36009 | |
| DE 52 | RK 52/H, DT 52/H | 96 07 33016 | |
(9) | DE 100 | RK 100, RK 102 H, RK 103 H, 100 H, DK 102 P, DT 100/H, DT 102 H, DT 103 H | 96 07 33017 | |
| DE 6 | RK 106, DT 106 | 96 07 36004 | |
| DE 156 | RK 156/BH, DK 156 BP, DT 156 | 96 07 33040 | |
| DE 255 | RK 255/H, DK 255 P, DT 255/H | 96 07 33028 | |
| DE 510 | RK 510/H, RK 512 H, DK 512 P, DT 512 H, DT 510/H | 96 07 33038 | |
| DE 514 | RK 514/H/BH, DT ..., DK 514 BP | 96 07 33039 | |
| ES 4 | RK 1028/H/C/CH, 1028 P,RK 1028 CH, RK 1050 CH, DK 1028 P, DT ... | 96 07 36010 | |
Insert containers
With holding ring and plastic cover, for hanging in perforated stainless steel cover or inset strip. (Type SD 04/SD 05/KB 04 only for RK 31/H and stainless steel perforated lid DE 08).
Insert baskets
Fine mesh 1×1 mm, for small parts, for use in insert containers.
| Type | Version | Ø mm | Order No. | |
(14) | KD 0 | Stainless steel (not for SD 05) | 75 | 96 07 36202 | |
(15) | PD 04 | Plastic (also for SD 04/05/ KB 04) | 60 | 96 07 36204 | |
16 Mounting clips
Made of stainless steel, for holding laboratory flasks in baskets and equipment holders, mesh size up to 12 × 12 mm.
17 Adjustable handle
For insert baskets. One pair each.
| Type | fits | Order No. | |
| GV 3 | K 6BL, K 1C, K 3C, K 3CL, K 5C | 96 07 32879 | |
| GV 10 | K 10, K 10B, K 14, K 14B, K 28, K 28C | 96 07 32892 | |
Plastic baskets
Perforated, for cleaning delicate parts.
Plastic basins
With cover, for acoustic irradiation of acids, for removal of aggressive residues.
SONOREX special accessories for ultrasonic cleaners in medical applications
Stainless steel basket holder
For insert baskets, KT 14 for K 14 EM (1/2 DIN basket).
Stainless steel insert baskets
4 × 4 mm mesh width, for placement on a holder
Plastic insert baskets
Size of hole 10.4 × 6.8 mm, requires holder
| Type | fits | Order No. | |
| K 14 EP | RK 514/H, DT 514/H, ZE 514/ ... ZE 514 DT | 10 07 33096 | |
(20) | K 29 EP | RK 1028/H, DT 1028/H, ZE 1031/1032/1058/1059/ ... DT | 10 07 33083 | |
Silicone studded mats
For hanging baskets or insert baskets, for non-contact placement of instruments, especially micro instruments.
Holding clips
FE 12 - firmly holds endoscope accessories. Fits all baskets.
| 
















|
|