The laboratory hood is the type of hood which is typically used in laboratories. It can be used for all tasks in the laboratory.

Equipment:
Interior height 1500 mm
One-part front slide with sliding windows made of laminated safety glass
AutoProtect
Ceramics counter top with funnel sink, both blue-grey
Digital air stream monitoring with pressure transmitter
Interior lighting
Media equipment:
4 plugs 230 V/16 A, German
1 × cold water
Ventilation certified according to DIN 12924 part 1

Without the pictured accessories.

Fume hoods - more precise: hoods for working with aggressive media at high temperatures - are used when greater heat volumes are released, e.g. when fuming acids, or when working with aggressive chemicals.

Equipment:

• Interior height 1200 mm
• Digital air stream monitoring with pressure transmitter
• Interior lighting
• Media equipment: 4 plugs 230 V/16 A, German
  1 × cold water
  1 × burnable gas
• Ventilation certified according to DIN 12926 part 2 and EN 14175-3
• For connection to available venting system
• Including AutoProtect, the intelligent front sliding controller

Variants
Fume hoods, ceramics

• One-part front-slider with fixed window made of laminated safety glass
• Ceramics counter top with funnel sink, both blue-grey
• Interior lining made of extensive white ceramics

Especially for working with hydrofluoric acid

• One-part front slider with fixed window made of polycarbonate
• Polypropylene counter top with funnel sink, both blue-grey
• Interior lining made of extensive white polypropylene

With their certification according to DIN 12924 part 4, pharmacy hoods comply with the requirements of pharmacy regulations. They are perfectly suitable for handling dusty preparations or volatile chemicals.

Equipment:

• Hood for setting up on a table in sitting work height (750 mm)
• Self-supporting housing made of galvanised and epoxy-coated steel
• Colour: light-blue (similar to RAL 7035)
• Certified according to DIN 12924 part 4
• GS-certificate by TÜV Product Service
• Air stream monitoring unit according to DIN 12924, battery-buffered
• Front slider made of polyacrylics
• Counter top made of epoxy-coated steel
• Power supply: 230 V
• Exhaust connection: DN 110
• Work space lighting
• Media equipment:
  1 × burnable gas
  2 × 230 V
  1 × water

Underbench cabinet optional

Table exhaust hoods are used to exhaust minor dangerous pollutants, which could be released for example during refilling. Because they are covered from three sides, they provide a quite good exhaust performance. Table exhaust hoods are not a replacement for laboratory hoods, because they are not ventilation-certified.

Equipment:

• For setting up on a table in sitting or standing working height
• Self-supporting housing made of galvanised and epoxy-coated steel
• Colour: light-blue (similar to RAL 7035)
• Front slider made of polyacrylics
• Exhaust connection: DN 110
• Work space lighting

Underbench cabinet optional

The pictured hoods are planning examples. We would be glad to compose an individually equipped hood according to your requirements. Cabinets, safety cabinets, chemical cabinets or acid-leach cabinets are not included in the scope of delivery. They can be ordered as accessories and can be upgraded without any problems.