Technical data:

pH-range:

0.00 to 14.00, resolution: 0.01 pH

mV-range:

-1999 to 1999, resolution: 1 mV

Temperature range °C:

0.0 to 100.0, resolution: 0.1°C

Calibration:

max. 2 points, 3 pre-defined buffer groups

Display:

LCD

Power supply:

ext. power adapter (standard)

FiveEasyTM measurement device, user manual, short guide, power adapter

same as FE20-Basic, plus ph-electrode LE409, electrode arm, 2 buffer bags pH 4.01 and 7.00

same as FE20-Kit, but with electrode LE438 incl. temperature sensor

Technical data:

pH-range:

0.001 bis 14.000, resolution: 0.001 pH

mV-range:

-1999 to 1999, resolution: 1 mV

Temperature range °C:

-5.0 to 105.0, resolution: 0,1°C

Calibration settings:

4 fixed buffer groups, 1 user-defined buffer group

Display:

Large and clear LCD-Display ("All at one glance")

Power supply:

power (9V, DC) or 4 AA-batteries (not incl.)

Sensor input:

BNC, Cinch/RCA (NTC 30 KOhm)

Interface:

RS232 (connector to printer or PC)

SevenEasy™ pH, device incl. electrode holder, user manual, conformity declaration and test certificate

Kit-version (as S20, including electrode InLab®Expert Pro and buffer bag)

Kit-version (as S20, including InLab®Routine Pro and buffer bag)

Technical data:

pH-measuring range:

-2.000 to 19.999, resolution 0.001

Ion concentration:

in %, ppm, mg/l, mmol/l 1.00 × 10-9 bis 9.99 × 10+9, resolution ±1 Digit

mV-measuring range:

-1999 to 1999 mV, resolution 0.1

Temperature measuring range:

-5.0 to 130.0°C, resolution 0.1°C

Conductivity:

0.01 μS/cm to 1000 mS/cm

TDS:

0.1 mg/l to 2000g/l

Special inhibitors:

0.00 to 200 MOhm × cm

Salinity:

0.00 to 80.00 ppt

Measuring module pH:

• 1- to 9-point calibration with automatic buffer recognition

• 8 predefined buffer buffer records, 1 buffer record freely definable

• Automatic temperature compensation with NTC 30kOhm or PT1000 sensors

• Electrode test

Measuring module conductivity:

• Automatic recognition of calibration status

• Selectable reference temperature (20 or 25°C)

• Linear, non-linear temperature compensation or usp/EP mode

Measuring module ion concentration / pH:

• Like pH measuring module plus:

• Storage of calibration data for up to 10 sensors

• Direct measurement, standard or sample addition/subtraction

Measuring module ISFET (for connection of ISFET sensor Inlab490):

• Like pH measuring module

incl. pH-module, electrode arm, protective cover, certificate, universal power supply

as S40 plus electrode InLab®Expert Pro, 6 bags of calibration buffer

as S40 plus glass electrode InLab®Routine Pro, 6 bags of calibration buffer

incl. conductivity module, electrode arm, protective cover, certificate, universal power supply

as S70 plus electrode InLab®731, 4 bags of calibration standard

incl. pH module, conductivity module, electrode arm, protective cover, certificate, universal power supply

as S47 plus electrode InLab®Expert Pro, InLab®731, 8 bags of calibration buffer/standard

as S47-K but with pH glass electrode InLab®Routine Pro

as S47-K, but with pH glass electrode InLab®Pure Pro and conductivity electrode InLab®741 for low conductive fluids

incl. ion module, electrode arm, protective cover, certificate, power supply

as S50 plus pH electrode InLab®Expert Pro, 6 bags of calibration buffer

incl. 2 pieces of ion module, electrode arm, protective cover, certificate, power supply

as S80 plus pH electrode InLab®Expert Pro, 6 bags of calibration buffer

for expansion/addition of SevenMulti

for expansion/addition of SevenMulti

for expansion/addition of SevenMulti

for expansion/addition of SevenMulti

(Interface extension)

Data transfer software

(for screw mounting or freestanding)