Temperature controlled shaking

General features

• One base unit only accepts 3 reaction blocks for solid phase or 3 reaction blocks for solution phase applications with gentle vortexing that does not damage resin
• Reaction block features four heating zones which allow you to apply selectively different temperatures and facilitate reaction optimization
• Exceptional visual control of reaction in each vessel and immediate access to every sample due to circular design
• Optional temperature sensor positioned in the reaction vessel enables the most accurate temperature control and reproducibility
• Exceptional chemical resistance due to PTFE and PFA material – resin will not stick to inner walls of reaction vessel and provides clear visibility of the sample
• Perform reactions at temperatures as low as -80°C via external chiller
• Fast heat transfer from the heating zone allows for sample temperature settings up to 160°C

Titramax 100 – The compact model

• Titramax 100 is a compact and space saving unit that accepts load capacities of 2 kg and space for 4 microtiter plates
• Your analog process timer allows for unattended operation and can be set from 1 to 120 minutes. After time expires this model sends an acoustic alarm and operation is stopped
• Set and continuously adjust the variable speed on the analog control knob from 150 to 1,350 rpm
• The 1.5 mm vibration orbit performs gentle mixing with best results using small sample volumes
• Are you working with heat sensitive samples? Platform shalers come with an insulated system to prevent any heat transfer from the motor that could cause potential thermal damage to your sample

Titramax 101 – The strong model

• Includes all Titramax 100 features, plus:
• The 3 mm vibration orbit accomplishes better results with higher volume samples than the Titramax 100 to yield consistent mixing of samples in the plate

Titramax 1000 – The incubating model

• Includes all Titramax 100 features, plus:
• The use of 6 microtiter plates increases your throughput by 50 %
• The 1.5 mm vibration orbit performs gentle mixing with best results using small sample volumes
• Titramax 1000 is a medium sized model and accepts load capacities of 5 kg
• This model is suitable for the modular incubator system and is recommended for applications which require variable temperature control of up to 65 °C

Vibramax 100 – The compact model

• A large selection of attachments is provided fort he use od various vessels and sizes
• Vibramax 100 is a compact and space saving unit with a load capacity of 2 kg
• The 3 mm vibration orbit gives excellent results especially in large vessels – allows for smooth to ridged mixing of viscous media and solids
• Set and continuously adjust the variable speed on the analog control knob from 150 to 1,350 rpm
• Your analog process timer allows for unattended operation and can be set from 1 to 120 minutes. After time expires this model sends an acoustic alarm and operation is stopped
• Optional attachments with tension rollers accepts any glassware size

Vibramax 110 – The efficient model

• Includes all Vibramax 100 features, plus:
• The shaking orbit of 1.5 mm performs a gentle motion for sensitive samples
• Set and continuously adjust the variable speed on the analog control knob from 150 to 2,500 rpm
• Ideal for the optional attachments to use 49 test tubes that increases your throughput significantly

Rotamax 120 – The compact model

• Wide range or accessories, attachments and clamps for up to 36 Erlenmeyer flasks available
• The shakingorbit of 20 mm performs a gentle motion for sensitive samples and supports culture plates and Erlenmeyer flasks
• Set and continuously adjust the variable speed on the analog control knob from 20 to 300 rpm
• Your analog process timer allows for unattended operation and can be set from 1 to 120 minutes. After time expires this model sends an acoustic alarm and operation is stopped
• Rotamax 120 is a compact and space saving unit that accepts load capacities of 2 kg and offers space for 4 medium sized culture plates
  

Unimax 1010 – The incubating model

• Includes all Rotamax/Unimax features, plus:
• This model is suitable fort he modular incubator system and is recommended for applications which require variable temperature control up to 65°C
• The shaking orbit of 10 mm performs a gentle motion for sensitive samples and supports culture plates and Erlenmeyer flasks
• Set und continuously adjust the variable speed on the digital display from 30 to 500 rpm
• Your digital process timer allows for unattended operation and can be set from 1 to 999 minutes. After time expires this model sends an acoustic alarm and operation is stopped
• The Unimax 1010 is a medium sized model and accepts load capacities of 5 kg
  

Unimax 2010 – The resilient model

• Includes all Unimax 1010 features, plus:
• The shaking orbit of 20 mm performs a gentle motion for sensitive samples and supports culture plates and Erlenmeyer flasks
• Set and asjust continuously variable speed on the digital display from 20 to 400 rpm
• Your digital process timer allows for unattended operation and can be set from 1 to 120 minutes.After time expires this model sends an acoustic alarm and operation is stopped
• Increase your sample throughput with the optional multi-tier attachment for a variety of vessel sizes
• The Unimax 2010 is a large model and accepts a load capacity of 10 kg for high sample throughput

Promax 1020 – The incubating model

• This model is suitable for the modular incubator system and is recommended for applications which require variable temperature control up to 65 °C
• Wide range of accessories, attachments and clamps for separatory funnels available
• With a stroke length of 32 mm the Promax model performs an ideal motion for separatory funnels
• Set and continuously adjust the variable speed on the digital display from 30 to 250 rpm
• Your digital process timer allows for unattended operation and can be set from 1 to 999 minutes. After time expires this model sends an acoustic alarm and operation is stopped
• The Promax 1020 is a medium sized model and accepts load capacities of 5 kg

Promax 2020 – The resilient model

• Includes all Promax 1020 features, plus:
• With a stroke length of 20 mm this Promax model can mix larger volumes with ease
• Set and continuously adjust the variable speed on the digital display from 20 to 400 rpm – ideal for separations
• Your digital process timer allows for unattended operation and can be set from 1 to 120 minutes. After time expires this model sends an acoustic alarm and operation is stopped
• The Promax 2020 is a large model land accept a load capacity of 10 kg for high sample throughput

Duomax 1030 – The incubating model

• This model is suitable fort he modular incubator system and is recommended for applications which require variable temperature settings
• Choose your angle between these two options:
  tilt angle of 5° for soft and gentle movements or
  tilt angle of 10° for a much stronger motion
• Set and continuously adjust the variable speed on the analog control knob from 2 to 50 rpm – ideal for media bottles
• Your analog process timer allows for unattended operation and can be set from 1 to 120 minutes. After time expires this model sends an acoustic alarm and operation is stopped
• The Duomax 1030 is a medium sized model and accepts load capacities of 5 kg

Polymax 1040 – The incubating model

• This model is suitable for the modular incubator system and is recommended for applications which require variable temperature control up to 65°
• Choose your angle between these two options:
  tilt angle of 5° for soft and gentle movements or
  tilt angle of 10° for a much stronger motion
• Use this model for any vessel – from culture plates, media bottles and Erlenmeyer flasks – there is no limit
• Set and continuously adjust the variable speed on the analog control knob from 2 to 50 rpm – ideal for cell culture plates
• Your analog process timer allows for unattended operation and can be set from 1 to 120 minutes. After time expires this model sends an acoustic alarm and operation is stopped
• The Polymax 1040 is a medium sized model and accepts load capacities of 5 kg

Polymax 2040 – The resilient model

• Set and continuously adjust the variable speed on the digital display from 2.5 to 50 rpm – ideal for cell culture plates
• Your digital process timer allows for unattended operation and can be set from 1 to 120 minutes. After time expires this model sends an acoustic alarm and operation is stopped
• The Polymax 2040 is a large model and accepts load capacity of 10 kg for high sample throughput

This truly unique gives you all in one: Shaking, mixing and heating with visual reaction control at all times. These platform shakers are compatible with the incubator system: Duomax 1030, Polymax 1040, Titramax 1000, Unimax 1010 und Promax 1020

• Heating module allows for gentle temperature adjustments up to 65°C
• Electrial heater allows for quick and even temperature distribution throughout the entire enclusure
• Unlimited visual reaction control at all times: The transparent and non – fogging PETG construction offers it all
• Three otions available: A flat hood for small vessels and mictrotiter plates, a high hood for all common medium sized vessels and even a high hood XL for larger Erlenmeyer flasks up to 2,000 ml
• Immediate access: The incubator hood opens instantly and interlooks in any position
• Use ONE icubator for numerous shakers – interchangeability is ensured and takes less than 2 minutes. You can incubate and mix simultaneously or independently

Heating module

• Heating capacity of 300 W allows for quick temperature adjustment
• Digital temperature settings up to 65°C and separate display for actual temperature
• To protect your sample from thermal damages this unit features a safety circuit to prevent overheating
• Electrical heater comes with low – noise blower and provides accuracy of ±2°C up to 50°C and ±4°C over 50°C

Titramax package
This package includes:
1 × vibrating platform shaker Titramax 1000
1 × heating module and
1 × flat incubator hood

Unimax package
This package includes:
1 × orbital platform shaker Unimax 1010
1 × heating module and
1 × high incubator hood