Chemic ALS - Via S.Francesco d'Assisi, 200 - 70018 Rutigliano (BA) - Italy - tel. (+39)080.476.10.66 - fax (+39)080.476.11.26 - info@labcatalogo.it - www.labcatalogo.it
Main -> Heating units, refrigerating units -> Temperature controllers -> Heating plates, multipurpose baths
Hot Plates made of CERAN 500®, Gestigkeit

High-duty hot plates made of CERAN®with thermostatic temperature control from +50 to 500°C
CERAN® - an extraordinary glass ceramic which is extremely resistant to breakage and changes of temperature, will not distort, infrared transmitting and also hight acid-resistant. Its popularity as a material for hot plates in increasing continually.

Features:
The low-mass plate is electrically heated over its full surface, and is embedded into a high-grade, stainless steel frame which is mounted on an internally insulated stainless steel housing. The housing is 5 mm bigger all-round than the Ceran plate. Four feet, which can be individually adjusted to an approximate height of 8 mm, ensure wobble-free standing. The overall height when the feet are screwed right in amounts to 98 mm. Types 4 A and 4 SR are equipped with additional sockets for 4 screw-in retort rods with a diameter of 12 mm.

The entire temperature control system is accommodated in a sealed pressure-cast aluminium case with IP 65 protection. The temperature is set on a °C temperature scale from +50 to 500°C and remains constant automatically. Very good control accuracy, e.g. ± 4°C at 100°C to ±2°C at up to 300°C an more, are achieved thanks to the low-mass heating system and fast responding temperature sensor. These small differences are hardly notable in the heated material. Heat up times are very short, e.g. just 8 minutes to 500°C.

Series A - Bench-top units with attached control case
TypePlatform size
mm		Wght
kg		P rating
W		Voltage
V		Order No.
(1)4 A430×140 5150023043 06 05004
11 A280×280 5.5200023043 06 05011
(2)22 A280×430 7300023043 06 05022
33 A430×430 944003×40043 06 05033
44 A430×58011.557003×40043 06 05044


Series SR - Units with a separate control case for wall mounting
TypePlatform size
mm		Wght
kg		P rating
W		Voltage
V		Order No.
4 SR430×140 5150023043 06 05204
11 SR280×280 5.5200023043 06 05211
(3)22 SR280×430 7300023043 06 05222
33 SR430×430 944003×40043 06 05233
44 SR430×58011.557003×40043 06 05244



The standard length of the cable between the control case and the heater is 1.3 m. Each additional 0.5 m incurs an extra charge equal to 1% of the unit's price. Please quote required cable length when ordering.

4 Series EB - Flush-mounting units for installing in benches
TypePlatform size
mm		Wght
kg		P rating
W		Voltage
V		A
mm		B
mm		C
mm		D
mm		Order No.
11 EB280×280 5.5200023029029024024043 06 05311
22 EB280×430 7300023044029039024043 06 05322
33 EB430×430 944003×40044044039039043 06 05333
44 EB430×58011.557003×40044059039054043 06 05344



Hot plate as flush-mounting unit for installing in benches. Separate controller case (175 × 60 × 80 mm) for installing behind the bench frame. The standard length of the cable between the hot plate and the controller case is 0.65 m.
These flush-mounting hot plates are available in an additional version with stainless steel insertable frame. For technical specifications and dimension drawings go to www.gestigkeit.de.