Fuzzy-supported process controller for volume-optimized temperature control - individually for each shelf - programmable for up to 40 ramps (Multi-Level-Controlling), adapting its performance to the volume (local temperature sensing ) for each thermoshelf. Digital display of actual temperature traceable individually for each thermoshelf (Multi-Level-Overtemperature Protection MLOP), activated at 3°C above the setpoint. 7-day-program-timer with real time clock and timer (for residual time - programmable for each ramp segment). Multiple overtemperature protection, undertemperature alarm and gliding over/undertemperature monitoring linked automatically to the setpoint (ASF = Auto-Safety Function) at a preselected tolerance margin. Autodiagnostic system for rapid fault identification. Menu guidance by 8-digit alphanumerical display. Setpoints and actual temperature recording with MEMory Card XL up to 40 ramps. Ring store 1024 kB for long-term documentation of all relevant data.
Digital electronic pressure control (in program operating up to 40 ramps, settable for each segment) for vacuum control via solenoid valves. Setting range from 10 mbar to 1100 mbar. One programmable, digitally controlled inlet for air. Integrated drying process control with programmable vacuum cycles for a speeded-up moisture reduction.

Interface USB with software "Celsius" with advanced features for temperature and pressure. 2 connection options for thermoshelves
1 aluminum thermoshelf, anodized, material 3.3547 (ASTM B 209).
Works calibration certificate (measuring point at the center of the thermoshelf for 160°C at 50 mbar pressure); a separate certificate is prepared for each thermoshelf ordered and shipped together with the vacuum oven.

External dimensions: depth without door handle, depth of door handle 38 mm
Electrical load: with max. number of thermoshelves
All vacuum ovens according to DIN 12880:2007-05. Standard ovens bear the marks: EMV/VDE/GS/CE/GOST

Programmable and digitally controlled inlet for inert gas with a flow rate reduction.

Optimised rinsing procedures for pump membranes as needed, as well as signal output for pumps ON/OFF (recommended with PMP)

Contains the options of inert gas inlet and pump control, printer port, one (size 200) or two (size 400/500) additional connections for thermoshelves, one extra thermoshelf (size 400/500) and one drip tray.

anodized, material 3.3547 (ASTM B209)

No. 1.4404 (ASTM 316 L) for particularly corrosion-prone materials

material 1.4404 (ASTM 316 L)

With antivibration metal plate at the bottom to accommodate the vacuum pump, including full-sight glass door, socket, signal cable and connecting hose to the vacuum oven.

Ditto, 230 V, 50 Hz (other voltages upon request)
Requires pump control or Premium module at VO.

With PTFE double diaphragm, with automatic purge process through controller of vacuum oven (signal cable and vacuum connection - see below - are compulsory).
For combination with pump control or Premium module.

Tubular steel, black enamelled (for stacking unit consisting of vacuum oven and pump module, total height: 1650 mm)

We reserve the right to make changes in technical specifications. Dimensions subject to confirmation.
All performance data are typical mean values for serial devices.